| Product Summary |
| Adhesive: |
Clear Permanent Acrylic |
| Liner: |
90# |
| Opacity: |
Good |
| Gloss Level: |
High |
| Outdoor Durability: |
Up to 5 Years |
| Recommended Applications |
- Simple Curves
- Decals
- Indoor
- Outdoor
|
|
|
|
Product Code
|
Available Sizes
|
| SPMS300GWF3010 |
30” X 10 FT |
| SPM300GWF3050 |
30” X 50 YDS |
| SPM300GWF5425 |
54” X 25 YDS |
| SPM300GWF5450 |
54” X 50 YDS |
| SPM300GWF6025 |
60” X 25 YDS |
| SPM300GWF6050 |
60” X 50 YDS |
|
| Construction |
| Applications: |
|
| Face Film: |
3 mil high gloss, polymeric, intermediate calendered vinyl film |
| Adhesive Release: |
Aggressive, acrylic, permanent, pressure-sensitive. Not to be used with solvent based application fluids |
| Liner: |
90# |
| Specifications |
| Print Methods: |
|
| Converting Methods: |
|
| Temperature Range: |
50°F. to +150°F. — Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions. |
| Thickness: |
|
| Chemical Resistance: |
Good for most petroleum solvents and lower aliphatic alcohols. Ultimate solvent resistance. |
| Water Resistance: |
Excellent: Test piece aged 24 hrs. after application to stainless steel panel before testing. Not affected when immersed in 70°F water for seven days.
NOTE: Always pretest your specific substrates prior to actual application. |
| Finish: |
|
| Shelf Life: |
2 years when stored under conditions of 70°F and 50% relative humidity. |
| The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.) |
|
